Application range The MEC II S.C. version has been specially developed as a compressor to completely empty hose reels, Properties The MEC II S.C. version can create positive pressure up to a maximum of 4 bar, Nominal volume flow rate 13845 l/min, Drive type PTO 540 rpm, Direction of rotation Counter-clockwise (CCW), Ballast air injection system No, Lubrication system type Forced, Vane type Long life, Crash protection system Yes, Max vacuum 0.95 BAR, Max. relative pressure 4 BAR, Diameter of hose connection 2-1/2 Inch, Safety valve connection diameter 2 Inch, Total length 830 mm, Total width 390 mm, Height 450 mm, Mounting holes diameter 22 mm, Mounting holes to shaft end distance 391 mm, Mounting holes to end distance 192 mm, Shaft centre to left side end distance 195 mm, Shaft centre to right side end distance 195 mm, Shaft centre to bottom distance 69 mm, Shaft diameter 1-3/8 Inch, Max. shaft rotation 600 r/min, Reservoir capacity 3.5 l, Weight 151 kg 26 1
Part numberMEC13500MSC EANUnitEach DetailsThe MEC II-series pumps have an automatic protection system. So, for example, if a vane breaks, the rotor and rotor housing can be protected by the rotor—including the flange mountings—being pushed downwards MEC II-series pumps are supplied with long-life (heat-resistant) vanes as standard MEC II-series pumps feature a temperature meter to enable the temperature to be read during operation A maintenance hatch can be used to determine the wear condition of the vanes, indicating when the vanes need to be replaced Each pump is subjected to a final check in the factory, in which the vacuum, compression and lubrication are tested, among other factors A test report relating to the serial number is drawn up for each pump Application rangeThe MEC II S.C. version has been specially developed as a compressor to completely empty hose reels PropertiesThe MEC II S.C. version can create positive pressure up to a maximum of 4 bar Technical infoComposition of the item numbers: MEC = series, 9000 = type, M = indirect drive 540 rpm, SC = reel compressor Reel compressors are equipped with a forced lubrication system that is set using dripper nozzles The lubrication system must be checked at all times to ensure proper function Pumps with indirect drive (M) must be driven anti-clockwise The direction of rotation is determined when the axle to be driven is aligned with the observer If the pump has a direct drive (for example, by a tractor unit) it must be driven anti-clockwise Oil to be used for lubricating the vanes: genuine oil from B. P. (item number BP5070) BenefitsMinimum repair costs thanks to the unique automatic protection system As pumps from B.P. are tested, inspected and packaged with the utmost care, trouble-free start-up is 100% guaranteed Nominal volume flow rate13845 l/minDrive typePTO 540 rpm Direction of rotationCounter-clockwise (CCW) Ballast air injection systemNo Consists ofThe S. C. version features a forced lubrication system Including PTO shaft cover The pumps are delivered without lubrication oil (item BP5070) Lubrication system typeForced Vane typeLong life Crash protection systemYes Max vacuum0.95 BARMax. relative pressure4 BARDiameter of hose connection2-1/2 InchSafety valve connection diameter2 InchTotal length830 mmTotal width390 mmHeight450 mmMounting holes diameter22 mmMounting holes distance246 mm247 mmMounting holes to shaft end distance391 mmMounting holes to end distance192 mmShaft centre to left side end distance195 mmShaft centre to right side end distance195 mmShaft centre to bottom distance69 mmShaft diameter1-3/8 InchMax. shaft rotation600 r/minReservoir capacity3.5 lWeight151 kg
|
.png){kind=logo}
