EURO72MVLA
Application range These vacuum pumps with vanes are mainly used in agriculture for filling and emptying slurry tanks, Properties These pumps can generate both positive pressure and vacuum, Nominal volume flow rate 12750 l/min, Drive type PTO 540 rpm, Direction of rotation Counter-clockwise (CCW), Ballast air injection system No, Lubrication system type Automatic, Vane type Standard, Crash protection system No, Max vacuum 0.9 BAR, Max. relative pressure 1.5 BAR, Power requirement for max. pressure 33 kW, Power requirement for max. vacuum 28 kW, Safety valve connection diameter 2 Inch, Depression valve connection diameter 1-1/2 Inch, Total length 811 mm, Total width 490 mm, Height 540 mm, PRotor housing height 326 mm, OUpper housing height 214 mm, LMounting holes diameter 18 mm, NMounting holes to shaft end distance 311 mm, MMounting holes to end distance 189 mm, KShaft centre to left side end distance 220 mm, XShaft centre to right side end distance 220 mm, Shaft diameter 1-3/8 Inch, Max. shaft rotation 600 r/min, Weight 228 kg 28 1
Part numberSTAR72MA EANUnitEach Application rangeThese vacuum pumps with vanes are mainly used in agriculture for filling and emptying slurry tanks PropertiesThese pumps can generate both positive pressure and vacuum Technical infoComposition of the item numbers: STAR = series, 72 = type, M = indirect drive 540 rpm, A = automatic lubrication On pumps without automatic lubrication (no "A" in the item number), the pump is equipped with a forced lubrication system that is adjusted using dripper nozzles On pumps without automatic lubrication, the quantity of lubrication oil is set in the factory and cannot be changed without a tool In the case of forced lubrication, as with automatic lubrication, the function must be checked at all times during operation Pumps with indirect drive (M) must be driven anti-clockwise The direction of rotation is determined when the axle to be driven is aligned with the observer If the pump has a direct drive (for example, by a tractor unit) it must be driven anti-clockwise Oil to be used for lubricating the vanes: genuine oil from B. P. (item number BP5070) STAR replaces the Agri- and Euro series Nominal volume flow rate12750 l/minDrive typePTO 540 rpm Direction of rotationCounter-clockwise (CCW) Ballast air injection systemNo Consists ofIncluding PTO shaft cover Including vacuum valve Without pressure relief valve (item 0200013) These pumps are supplied with standard vanes Long-life vanes available on request Including swivelling connection pipes The pumps are delivered without lubrication oil (item BP5070) Lubrication system typeAutomatic Vane typeStandard Crash protection systemNo Max vacuum0.9 BARMax. relative pressure1.5 BARPower requirement for max. pressure33 kWPower requirement for max. vacuum28 kWSafety valve connection diameter2 InchDepression valve connection diameter1-1/2 InchATotal length811 mmBTotal width490 mmCHeight540 mmPRotor housing height326 mmOUpper housing height214 mmLMounting holes diameter18 mmIMounting holes distance247 mm245 mmNMounting holes to shaft end distance311 mmMMounting holes to end distance189 mmKShaft centre to left side end distance220 mmXShaft centre to right side end distance220 mmShaft diameter1-3/8 InchMax. shaft rotation600 r/minWeight228 kg
|
.png){kind=logo}
