Application range These vacuum pumps with vanes are mainly used in agriculture for filling and emptying slurry tanks, Properties These pumps can generate both positive pressure and vacuum, Nominal volume flow rate 14800 l/min, Drive type Pulley, Direction of rotation Clockwise (CW), Ballast air injection system No, Lubrication system type Automatic, Vane type Standard, Crash protection system No, Max vacuum 0.9 BAR, Max. relative pressure 1.5 BAR, Power requirement for max. vacuum 29 kW, Total length 90 mm, OTotal width 490 mm, Height 540 mm, Mounting holes diameter 18 mm, Mounting holes to shaft end distance 289 mm, Mounting holes to end distance 269 mm, MShaft centre to left side end distance 220 mm, NShaft centre to right side end distance 220 mm, IShaft centre to bottom distance 196 mm, Shaft length 90 mm, Max. shaft rotation 1200 r/min, Weight 239 kg, Additional info Pump has at front and back side adjustable outlet. 25 1
Part numberSTAR84PRA EANUnitEach Application rangeThese vacuum pumps with vanes are mainly used in agriculture for filling and emptying slurry tanks PropertiesThese pumps can generate both positive pressure and vacuum Technical infoComposition of item numbers: STAR = series, 72 = type, P = pulley drive, R = clockwise rotation, A = automatic lubrication On pumps without automatic lubrication (no "A" in the item number), the pump is equipped with a forced lubrication system that is adjusted using dripper nozzles • Forced lubrication available on request On pumps without automatic lubrication, the quantity of lubrication oil is set in the factory and cannot be changed without a tool In the case of forced lubrication, as with automatic lubrication, the function must be checked at all times during operation Pumps with pulley drive rotate clockwise. Anti-clockwise rotation available on request The direction of rotation is determined when the axle to be driven is aligned with the observer Oil to be used for lubricating the vanes: genuine oil from B. P. (item number BP5070) STAR replaces the Agri- and Euro series Nominal volume flow rate14800 l/minDrive typePulley Direction of rotationClockwise (CW) Ballast air injection systemNo Consists ofWithout pulley Including vacuum valve Without pressure relief valve (item 0200013) These pumps are supplied with standard vanes Long-life vanes available on request Including swivelling connection pipes The pumps are delivered without lubrication oil (item BP5070) Lubrication system typeAutomatic Vane typeStandard Crash protection systemNo Max vacuum0.9 BARMax. relative pressure1.5 BARPower requirement for max. vacuum29 kWETotal length90 mmOTotal width490 mmGHeight540 mmFMounting holes diameter18 mmB,LMounting holes distance245 mm247 mmAMounting holes to shaft end distance289 mmCMounting holes to end distance269 mmMShaft centre to left side end distance220 mmNShaft centre to right side end distance220 mmIShaft centre to bottom distance196 mmShaft length90 mmMax. shaft rotation1200 r/minWeight239 kgAdditional infoPump has at front and back side adjustable outlet.
|
.png){kind=logo}
