Application range These vacuum pumps with vanes are mainly used in agriculture for filling and emptying slurry tanks, Benefits As B.P. pumps are tested, inspected and packaged with the utmost care, trouble-free start-up is 100% guaranteed, Nominal volume flow rate 1260 l/min, Drive type PTO 540 rpm, Direction of rotation Counter-clockwise (CCW), Ballast air injection system No, Lubrication system type Forced, Vane type Standard, Crash protection system No, Max vacuum 0.9 BAR, Max. relative pressure 1.5 BAR, Power requirement for max. pressure 7.5 kW, Power requirement for max. vacuum 4 kW, Diameter of hose connection 27 mm, Total length 395 mm, Total width 263 mm, Height 410 mm, Mounting holes diameter 11 mm, Mounting holes to shaft end distance 211 mm, Mounting holes to end distance 72 mm, Shaft centre to left side end distance 117 mm, Shaft centre to right side end distance 146 mm, Shaft diameter 1-3/8 Inch, Max. shaft rotation 600 r/min, Weight 40 kg 25 1
Part numberMEC1000M EANUnitEach DetailsEach pump is subjected to a final check in the factory, in which the vacuum, compression and lubrication are tested, among other factors A test report relating to the serial number is drawn up for each pump Application rangeThese vacuum pumps with vanes are mainly used in agriculture for filling and emptying slurry tanks PropertiesThese pumps can generate both positive pressure and vacuum Oil to be used for lubricating the vanes: genuine oil from B. P. Item number: BP5070 Technical infoComposition of the item numbers: MEC = series, 8000 = type, M = indirect drive 540 rpm, A = automatic lubrication On pumps without automatic lubrication (no "A" in the item number), the pump is equipped with a forced lubrication system that is adjusted using dripper nozzles On pumps without automatic lubrication, the quantity of lubrication oil is set in the factory and cannot be changed without a tool In the case of forced lubrication, as with automatic lubrication, the function must be checked at all times during operation Pumps with indirect drive (M) must be driven anti-clockwise The direction of rotation is determined when the axle to be driven is aligned with the observer If the pump has a direct drive (for example, by a tractor unit) it must be driven anti-clockwise BenefitsAs B.P. pumps are tested, inspected and packaged with the utmost care, trouble-free start-up is 100% guaranteed Nominal volume flow rate1260 l/minDrive typePTO 540 rpm Direction of rotationCounter-clockwise (CCW) Ballast air injection systemNo Consists ofThese pumps are supplied with standard vanes ("Long-life" vanes available on request) Without pressure relief valve and vacuum valve The pumps are delivered without lubrication oil (BP5070) Including PTO shaft cover Lubrication system typeForced Vane typeStandard Crash protection systemNo Max vacuum0.9 BARMax. relative pressure1.5 BARPower requirement for max. pressure7.5 kWPower requirement for max. vacuum4 kWDiameter of hose connection27 mmTotal length395 mmTotal width263 mmHeight410 mmMounting holes diameter11 mmMounting holes distance73 mm175 mmMounting holes to shaft end distance211 mmMounting holes to end distance72 mmShaft centre to left side end distance117 mmShaft centre to right side end distance146 mmShaft diameter1-3/8 InchMax. shaft rotation600 r/minWeight40 kg
|
.png){kind=logo}
