Application range These vacuum pumps with vanes are mainly used in agriculture for filling and emptying slurry tanks, Properties These pumps can generate both positive pressure and vacuum, Benefits As B.P. pumps are tested, inspected and packaged with the utmost care, trouble-free start-up is 100% guaranteed, Nominal volume flow rate 2750 l/min, Drive type Pulley, Direction of rotation Counter-clockwise (CCW), Ballast air injection system No, Lubrication system type Forced, Vane type Standard, Crash protection system No, Max vacuum 0.9 BAR, Max. relative pressure 1.5 BAR, Power requirement for max. vacuum 4.9 kW, Diameter of hose connection 45 mm, Safety valve connection diameter 1-1/4 Inch, Total length 393 mm, Total width 342 mm, Height 479 mm, HMounting holes diameter 15 mm, Mounting holes to shaft end distance 145 mm, Mounting holes to end distance 76 mm, Shaft centre to left side end distance 164 mm, Shaft centre to right side end distance 178 mm, Shaft centre to bottom distance 142 mm, Max. shaft rotation 1400 r/min, Weight 66 kg 26 1
Part numberMEC2000PL EANUnitEach DetailsEach pump is subjected to a final check in the factory, in which the vacuum, compression and lubrication are tested, among other factors A test report relating to the serial number is drawn up for each pump Application rangeThese vacuum pumps with vanes are mainly used in agriculture for filling and emptying slurry tanks PropertiesThese pumps can generate both positive pressure and vacuum Technical infoComposition of the item numbers: MEC = series, 8000 = type, P = pulley drive Pumps with an "L" in the item number must be driven anti-clockwise; pumps without an "L" in the item number must be driven clockwise On pumps without automatic lubrication (no "A" in the item number), the pump is equipped with a forced lubrication system that is adjusted using dripper nozzles Automatic lubrication available on request On pumps without automatic lubrication, the quantity of lubrication oil is set in the factory and cannot be changed without a tool In the case of forced lubrication, as with automatic lubrication, the function must be checked at all times during operation The direction of rotation is determined when the axle to be driven is aligned with the observer Oil to be used for lubricating the vanes: genuine oil from B. P. (item number BP5070) BenefitsAs B.P. pumps are tested, inspected and packaged with the utmost care, trouble-free start-up is 100% guaranteed Nominal volume flow rate2750 l/minDrive typePulley Direction of rotationCounter-clockwise (CCW) Ballast air injection systemNo Consists ofThese pumps are supplied with standard vanes. Long-life vanes available on request Without pressure relief valve and vacuum valve The pumps are delivered without lubrication oil (item BP5070) Without pulley Lubrication system typeForced Vane typeStandard Crash protection systemNo Max vacuum0.9 BARMax. relative pressure1.5 BARPower requirement for max. vacuum4.9 kWDiameter of hose connection45 mmSafety valve connection diameter1-1/4 InchATotal length393 mmBTotal width342 mmCHeight479 mmHMounting holes diameter15 mmIMounting holes distance227 mm172 mmMounting holes to shaft end distance145 mmMounting holes to end distance76 mmShaft centre to left side end distance164 mmShaft centre to right side end distance178 mmShaft centre to bottom distance142 mmMax. shaft rotation1400 r/minWeight66 kg
|
.png){kind=logo}
