Grozs
Jūsu iepirkumu grozs ir tukšs!
Preču kategorijas
| VLD3728 Long description: These square ball bearing units with four bolt holes are pre-assembled and pre-lubricated. This makes them rapidly deployable. The self-aligning spherical outer ring of the wide inner ring ball bearing compensates for shaft misalignment. Housing type: Square flange dBearing inside diameter: 35 mm aTotal length: 117 mm aHousing Platums: 117 mm Total height: 44.4 mm lHousing height: 34 mm BiBearing inner ring Platums: 42.9 mm Bearing balls distance to locking side end: 19 mm lBearing balls distance to mounting surface: 17.5 mm eMounting holes distance: 92 mm Mounting holes diameter: 14 mm Grease nipple thread diameter: M6 Basic radial load static: 15300 N Basic radial load dynamic: 25500 N Part numberUCF207 EAN4047643247665UnitEach Long descriptionThese square ball bearing units with four bolt holes are pre-assembled and pre-lubricated. This makes them rapidly deployable. The self-aligning spherical outer ring of the wide inner ring ball bearing compensates for shaft misalignment. ProsHighly suitable for limited installation spaces Assembled, ready for use Pre-lubricated Product detailsInner bearing has extended inner ring on both sides with 2 adjusting screws Regreasable Self-aligning ball bearing Wide inner ring ball bearing PropertiesInner bearing has extended inner ring with 2 adjusting screws on both sides Can be subsequently lubricated IncludesBearing block Bearing Grease nipple Housing typeSquare flange dBearing inside diameter35 mmaTotal length117 mmaHousing width117 mmTotal height44.4 mmlHousing height34 mmBiBearing inner ring width42.9 mmBearing balls distance to locking side end19 mmlBearing balls distance to mounting surface17.5 mmeMounting holes distance92 mmMounting holes diameter14 mmGrease nipple thread diameterM6 Basic radial load static15300 NBasic radial load dynamic25500 NOriginal number equivalentUCF207-J7 |
| Attēls | Produkta nosaukums | Cena | Produkta kods | Noliktavā | Daudzums |
|---|---|---|---|---|---|
|
SKF Gultņa korpuss 7500FYTF504 | 24.01€ | 7500FYTF504 |
Iepriekšpasūtījums
|
|
|
SKF Atloka gultnis pilns FY 7500FY50TF | 71.31€ | 7500FY50TF |
2-3 dienas
|
|
|
Ina/Fag Vāks SES korpusam EDK520617 | 19.64€ | EDK520617 |
2-3 dienas
|
|
|
Ina/Fag Lodīšu gultnis 40x68x15mm 6008 | 8.57€ | 6008 |
2-3 dienas
|
|
|
SKF Lodīšu gultnis 40x90x23mm 6308N | 63.88€ | 6308NSKF |
2-3 dienas
|
.png)
Traktoram.lv piedāvā plašu traktoru rezerves daļu klāstu: Apkopes materiālus, filtrus, tapas un bukses, hidraulikas rezerves daļas. Uzkares un transmisijas rezerves daļas. Lukturus, kabīnes stiklus, dzesēšanas sistēmas u. c.
Rūpniecības iela 18B, Cēsis, LV-4101
Tālrunis: +371 26622332
E-Pasts: [email protected]
SIA Pro Grupa
40103830871
Ēvalda Valtera iela 3-91, Rīga, LV-1021
AS Swedbank
LV51HABA0551039069244


.png)