Grozs
Jūsu iepirkumu grozs ir tukšs! | TSN513LSKF Consists of: 2 seals (4 halves): Part number7500TSN513L EAN7316572460627UnitEach DetailsGenerates less friction and can accommodate higher shaft speeds compared to double-lip seals Made from an injection moulded thermoplastic polyether ester elastomer (TPE) Application rangeUse as a replacement for double-seals in the size range 507 to 522 Suitable for peripheral speeds of up to 13 m/s PropertiesEasy to mount The maximum permissible misalignment of the shaft relative to the housing is approximately 1° for diameters up to 100 mm and approximately 0,5° for larger shafts The permissible axial movement of the shaft relative to the housing is not limited by the seal Technical infoThe counterfaces for the seals on the shaft should be ground and the surface roughness Ra should not exceed 3,2 μm The recommended shaft tolerance is h9 BenefitsHighly effective Wear-resistant and with very good elastic properties Consists of2 seals (4 halves) |