Grozs
Jūsu iepirkumu grozs ir tukšs! Iekšējais diametrs: 39 mm: Ārējais diametrs: 63.1 mm: Consists of: 2 seals (4 halves): Platums: 12.5 mm: Lip material: Thermoplastic polyether ester elastomer (TPE): Min working temperature: -40 °C: Max working temperature: 100 °C: Part numberTSN509LSKF EAN07316572460580UnitEach DetailsGenerates less friction and can accommodate higher shaft speeds compared to double-lip seals Made from an injection moulded thermoplastic polyether ester elastomer (TPE) Application rangeUse as a replacement for double-seals in the size range 507 to 522 Suitable for peripheral speeds of up to 13 m/s PropertiesEasy to mount The maximum permissible misalignment of the shaft relative to the housing is approximately 1° for diameters up to 100 mm and approximately 0,5° for larger shafts The permissible axial movement of the shaft relative to the housing is not limited by the seal Technical infoThe counterfaces for the seals on the shaft should be ground and the surface roughness Ra should not exceed 3,2 μm The recommended shaft tolerance is h9 BenefitsHighly effective Wear-resistant and with very good elastic properties Iekšējais diametrs39 mmĀrējais diametrs63.1 mmConsists of2 seals (4 halves) Platums12.5 mmLip materialThermoplastic polyether ester elastomer (TPE) Min working temperature-40 °CMax working temperature100 °COriginal number equivalentTSN59L |