Saņem pakomātā par 3,99 € *
Piegādes cena uz mājām 15.73 € * - Sūtījumam līdz 30 kg.
*Piegādāsim 1–3 darbdienu laikā, ja prece ir mūsu noliktavā.
| MEC13500HB Application range These vacuum pumps with vanes are mainly used in agriculture for filling and emptying slurry tanks, Properties These pumps can generate both positive pressure and vacuum, Drive type Hydraulic, Direction of rotation Clockwise (CW), Ballast air injection system Yes, Lubrication system type Automatic, Vane type Long life, Crash protection system Yes, Max. relative pressure 1.5 BAR 9 1 Part numberMEC13500HAB EANUnitEach DetailsThe MEC II-series pumps have an automatic protection system. So, for example, if a vane breaks, the rotor and rotor housing can be protected by the rotor—including the flange mountings—being pushed downwards Pumps with a "ballast system", identified by B at the end of the item number (e.g. MEC9000MB) have a longer operating time in vacuum operation The operating time at -0.95 bar lasts from 8 minutes (standard) up to a maximum of 15 minutes. Continuous operation is permissible at -0.6 bar. MEC II-series pumps are supplied with long-life (heat-resistant) vanes as standard MEC II-series pumps feature a temperature meter to enable the temperature to be read during operation A maintenance hatch can be used to determine the wear condition of the vanes, indicating when the vanes need to be replaced Each pump is subjected to a final check in the factory, in which the vacuum, compression and lubrication are tested, among other factors A test report relating to the serial number is drawn up for each pump Application rangeThese vacuum pumps with vanes are mainly used in agriculture for filling and emptying slurry tanks PropertiesThese pumps can generate both positive pressure and vacuum Technical infoComposition of the item numbers: MEC = series, 9000 = type, H = hydraulic drive, B = ballast system On pumps without automatic lubrication (no "A" in the item number), the pump is equipped with a forced lubrication system that is adjusted using dripper nozzles Automatic lubrication available on request On pumps without automatic lubrication, the quantity of lubrication oil is set in the factory and cannot be changed without a tool In the case of forced lubrication, as with automatic lubrication, the function must be checked at all times during operation Pumps with hydraulic drive are clockwise The direction of rotation is determined when the axle to be driven is aligned with the observer Oil to be used for lubricating the vanes: genuine oil from B. P. (item number BP5070) BenefitsMinimum repair costs thanks to the unique automatic protection system As pumps from B.P. are tested, inspected and packaged with the utmost care, trouble-free start-up is 100% guaranteed Drive typeHydraulic Direction of rotationClockwise (CW) Ballast air injection systemYes Consists ofWithout pressure relief valve (item 0200013) and vacuum valve (item 0155513) Without hydraulic motor and key bush The pumps are delivered without lubrication oil (item BP5070) Including hydraulic base for mounting the hydraulic motor Lubrication system typeAutomatic Vane typeLong life Crash protection systemYes Max. relative pressure1.5 BAR |
.png){kind=logo}
Traktoram.lv piedāvā plašu traktoru rezerves daļu klāstu: Apkopes materiālus, filtrus, tapas un bukses, hidraulikas rezerves daļas. Uzkares un transmisijas rezerves daļas. Lukturus, kabīnes stiklus, dzesēšanas sistēmas u. c.
Rūpniecības iela 18B, Cēsis, LV-4101
Tālrunis: +371 26622332
E-Pasts: info@progrupa.lv
